| SCREW PILES / SCREW ANCHORS |
| |
| Piletech uses in house software (SAAP) to model both installation criteria and load bearing capacity, including all other elements of pile/anchor integrity. Either click on Enquiry or call 0800 PILE IT for free design assistance. |
| |
| Design solutions are fully compliant and can be supported by geotechnical and structural peer reviews if required. |
| |
| Where necessary, designs are verified on site, using sustained static load testing according to AS2159-1995. Production Pile installation requirements are then linked to that of the test pile to ensure conformity to the proven design. |
| |
| Piletech Screw Pile / Screw Anchor Design Matrix |
| |
 |
| |
| Screw Pile / Screw Anchor Capacities |
| |
| Current maximum single pile tension Load 1500 kN |
| Current maximum single pile compression Load 3000 kN |
| Moment capacities of larger sections can exceed 200 kNM |
| |
| Suitable Ground for Screw Piling / Screw Anchoring |
| |
| Depth is unlimited and screw piling generally becomes more
competitive with depth over alternative systems. Screw piles
have difficulty penetrating rock, ie SPT blow counts greater than 100, although penetration relating to SPT or CPT results
differs widely depending on specific geology. Founding into
weathered rock or consistent sedimentary deposits are ideal
situations for screw piling. |
| |
| Screw Pile Specification |
| |
| Either click on specification PDF below or click on Enquiry or Call 0800 PILE IT to be sent copies |
| |
| Screw Pile Specifications (PDF 38KB) |
| |
| Screw Piling/Anchoring Brochures |
| |
| Either click on brochure PDF below or click on Enquiry or Call 0800 PILE IT to be sent copies |
| |
| Pylons and Pipelines Brochure (PDF 1.02MB) |
| Existing Structures Brochure (PDF 6.59MB) |
| Screw Piling Technical Brochure |
| Screw Piling Existing Structures |
| Energy and Telecommunications (PDF 621KB) |
| Retaining & Anchors (PDF 3.69MB) |
